Every other distro on the planet still works, so I'm just not going to bother with it for now. For the hell of it, here is the output of dmesg:

[ 0.000000] Linux version 2.6.24-16-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 12:47:45 UTC 2008 (Ubuntu 2.6.24-16.30-generic)

[ 0.000000] Command line: root=UUID=ebafed3b-671e-4d1a-871d-38f72013f014 ro splash vga=799

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)

[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfa13000 (usable)

[ 0.000000] BIOS-e820: 00000000cfa13000 - 00000000cfa15000 (reserved)

[ 0.000000] BIOS-e820: 00000000cfa15000 - 00000000cfafd000 (usable)

[ 0.000000] BIOS-e820: 00000000cfafd000 - 00000000cfbe5000 (ACPI NVS)

[ 0.000000] BIOS-e820: 00000000cfbe5000 - 00000000cfbe8000 (usable)

[ 0.000000] BIOS-e820: 00000000cfbe8000 - 00000000cfbf2000 (ACPI data)

[ 0.000000] BIOS-e820: 00000000cfbf2000 - 00000000cfbf3000 (usable)

[ 0.000000] BIOS-e820: 00000000cfbf3000 - 00000000cfbff000 (ACPI data)

[ 0.000000] BIOS-e820: 00000000cfbff000 - 00000000cfc00000 (usable)

[ 0.000000] BIOS-e820: 00000000cfc00000 - 00000000d0000000 (reserved)

[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)

[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)

[ 0.000000] BIOS-e820: 0000000100000000 - 000000012c000000 (usable)

[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used

[ 0.000000] Entering add_active_range(0, 256, 850451) 1 entries of 3200 used

[ 0.000000] Entering add_active_range(0, 850453, 850685) 2 entries of 3200 used

[ 0.000000] Entering add_active_range(0, 850917, 850920) 3 entries of 3200 used

[ 0.000000] Entering add_active_range(0, 850930, 850931) 4 entries of 3200 used

[ 0.000000] Entering add_active_range(0, 850943, 850944) 5 entries of 3200 used

[ 0.000000] Entering add_active_range(0, 1048576, 1228800) 6 entries of 3200 used

[ 0.000000] end_pfn_map = 1228800

[ 0.000000] DMI 2.4 present.

[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FE020 checksum 0

[ 0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL )

[ 0.000000] ACPI: RSDT CFBFD038, 0064 (r1 INTEL DG33TL 125 1000013)

[ 0.000000] ACPI: FACP CFBFC000, 0074 (r1 INTEL DG33TL 125 MSFT 1000013)

[ 0.000000] ACPI: DSDT CFBF8000, 3D05 (r1 INTEL DG33TL 125 MSFT 1000013)

[ 0.000000] ACPI: FACS CFB99000, 0040

[ 0.000000] ACPI: APIC CFBF7000, 0078 (r1 INTEL DG33TL 125 MSFT 1000013)

[ 0.000000] ACPI: WDDT CFBF6000, 0040 (r1 INTEL DG33TL 125 MSFT 1000013)

[ 0.000000] ACPI: MCFG CFBF5000, 003C (r1 INTEL DG33TL 125 MSFT 1000013)

[ 0.000000] ACPI: ASF! CFBF4000, 00A6 (r32 INTEL DG33TL 125 MSFT 1000013)

[ 0.000000] ACPI: HPET CFBF3000, 0038 (r1 INTEL DG33TL 125 MSFT 1000013)

[ 0.000000] ACPI: DMAR CFBF1000, 0128 (r1 INTEL DG33TL 125 MSFT 1000013)

[ 0.000000] ACPI: SSDT CFBF0000, 0204 (r1 INTEL CpuPm 125 MSFT 1000013)

[ 0.000000] ACPI: SSDT CFBEF000, 01B7 (r1 INTEL Cpu0Ist 125 MSFT 1000013)

[ 0.000000] ACPI: SSDT CFBEE000, 01B7 (r1 INTEL Cpu1Ist 125 MSFT 1000013)

[ 0.000000] ACPI: SSDT CFBED000, 01B7 (r1 INTEL Cpu2Ist 125 MSFT 1000013)

[ 0.000000] ACPI: SSDT CFBEC000, 01B7 (r1 INTEL Cpu3Ist 125 MSFT 1000013)

[ 0.000000] ACPI: SSDT CFBEB000, 00DD (r1 INTEL Cpu0Cst 125 MSFT 1000013)

[ 0.000000] ACPI: SSDT CFBEA000, 00DD (r1 INTEL Cpu1Cst 125 MSFT 1000013)

[ 0.000000] ACPI: SSDT CFBE9000, 00DD (r1 INTEL Cpu2Cst 125 MSFT 1000013)

[ 0.000000] ACPI: SSDT CFBE8000, 00DD (r1 INTEL Cpu3Cst 125 MSFT 1000013)

[ 0.000000] No NUMA configuration found

[ 0.000000] Faking a node at 0000000000000000-000000012c000000

[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used

[ 0.000000] Entering add_active_range(0, 256, 850451) 1 entries of 3200 used

[ 0.000000] Entering add_active_range(0, 850453, 850685) 2 entries of 3200 used

[ 0.000000] Entering add_active_range(0, 850917, 850920) 3 entries of 3200 used

[ 0.000000] Entering add_active_range(0, 850930, 850931) 4 entries of 3200 used

[ 0.000000] Entering add_active_range(0, 850943, 850944) 5 entries of 3200 used

[ 0.000000] Entering add_active_range(0, 1048576, 1228800) 6 entries of 3200 used

[ 0.000000] Bootmem setup node 0 0000000000000000-000000012c000000

[ 0.000000] Zone PFN ranges:

[ 0.000000] DMA 0 -> 4096

[ 0.000000] DMA32 4096 -> 1048576

[ 0.000000] Normal 1048576 -> 1228800

[ 0.000000] Movable zone start PFN for each node

[ 0.000000] early_node_map[7] active PFN ranges

[ 0.000000] 0: 0 -> 159

[ 0.000000] 0: 256 -> 850451

[ 0.000000] 0: 850453 -> 850685

[ 0.000000] 0: 850917 -> 850920

[ 0.000000] 0: 850930 -> 850931

[ 0.000000] 0: 850943 -> 850944

[ 0.000000] 0: 1048576 -> 1228800

[ 0.000000] On node 0 totalpages: 1030815

[ 0.000000] DMA zone: 56 pages used for memmap

[ 0.000000] DMA zone: 1210 pages reserved

[ 0.000000] DMA zone: 2733 pages, LIFO batch:0

[ 0.000000] DMA32 zone: 14280 pages used for memmap

[ 0.000000] DMA32 zone: 832312 pages, LIFO batch:31

[ 0.000000] Normal zone: 2464 pages used for memmap

[ 0.000000] Normal zone: 177760 pages, LIFO batch:31

[ 0.000000] Movable zone: 0 pages used for memmap

[ 0.000000] ACPI: PM-Timer IO Port: 0x408

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

[ 0.000000] Processor #0 (Bootup-CPU)

[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)

[ 0.000000] Processor #2

[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)

[ 0.000000] Processor #1

[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)

[ 0.000000] Processor #3

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])

[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[ 0.000000] ACPI: IRQ0 used by override.

[ 0.000000] ACPI: IRQ2 used by override.

[ 0.000000] ACPI: IRQ9 used by override.

[ 0.000000] Setting APIC routing to flat

[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000

[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000

[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000

[ 0.000000] swsusp: Registered nosave memory region: 00000000cfa13000 - 00000000cfa15000

[ 0.000000] swsusp: Registered nosave memory region: 00000000cfafd000 - 00000000cfbe5000

[ 0.000000] swsusp: Registered nosave memory region: 00000000cfbe8000 - 00000000cfbf2000

[ 0.000000] swsusp: Registered nosave memory region: 00000000cfbf3000 - 00000000cfbff000

[ 0.000000] swsusp: Registered nosave memory region: 00000000cfc00000 - 00000000d0000000

[ 0.000000] swsusp: Registered nosave memory region: 00000000d0000000 - 00000000f0000000

[ 0.000000] swsusp: Registered nosave memory region: 00000000f0000000 - 00000000f8000000

[ 0.000000] swsusp: Registered nosave memory region: 00000000f8000000 - 00000000fff00000

[ 0.000000] swsusp: Registered nosave memory region: 00000000fff00000 - 0000000100000000

[ 0.000000] Allocating PCI resources starting at d2000000 (gap: d0000000:20000000)

[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs

[ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data

[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012805

[ 0.000000] Policy zone: Normal

[ 0.000000] Kernel command line: root=UUID=ebafed3b-671e-4d1a-871d-38f72013f014 ro splash vga=799

[ 0.000000] Initializing CPU#0

[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)

[ 0.000000] hpet clockevent registered

[ 0.000000] TSC calibrated against HPET

[ 39.864474] time.c: Detected 2653.333 MHz processor.

[ 39.866561] Console: colour VGA+ 80x60

[ 39.866564] console [tty0] enabled

[ 39.870795] Checking aperture...

[ 39.870843] Calgary: detecting Calgary via BIOS EBDA area

[ 39.870847] Calgary: Unable to locate Rio Grande table in EBDA - bailing!

[ 39.870848] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[ 39.901920] Placing software IO TLB between 0x104e000 - 0x504e000

[ 39.931943] Memory: 3976980k/4915200k available (2466k kernel code, 146280k reserved, 1309k data, 316k init)

[ 39.932022] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1

[ 40.010112] Calibrating delay using timer specific routine.. 5310.23 BogoMIPS (lpj=10620460)

[ 40.010220] Security Framework initialized

[ 40.010266] SELinux: Disabled at boot.

[ 40.010316] AppArmor: AppArmor initialized

[ 40.010360] Failure registering capabilities with primary security module.

[ 40.010698] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)

[ 40.012533] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)

[ 40.013521] Mount-cache hash table entries: 256

[ 40.013673] CPU: L1 I cache: 32K, L1 D cache: 32K

[ 40.013750] CPU: L2 cache: 4096K

[ 40.013792] CPU 0/0 -> Node 0

[ 40.013833] using mwait in idle threads.

[ 40.013875] CPU: Physical Processor ID: 0

[ 40.013918] CPU: Processor Core ID: 0

[ 40.013963] CPU0: Thermal monitoring enabled (TM2)

[ 40.014015] SMP alternatives: switching to UP code

[ 40.014670] Early unpacking initramfs... done

[ 40.289376] ACPI: Core revision 20070126

[ 40.289453] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.

[ 40.333463] Using local APIC timer interrupts.

[ 40.371105] APIC timer calibration result 16583321

[ 40.371107] Detected 16.583 MHz APIC timer.

[ 40.371202] SMP alternatives: switching to SMP code

[ 40.371755] Booting processor 1/4 APIC 0x2

[ 40.382092] Initializing CPU#1

[ 40.458939] Calibrating delay using timer specific routine.. 5306.73 BogoMIPS (lpj=10613462)

[ 40.458944] CPU: L1 I cache: 32K, L1 D cache: 32K

[ 40.458945] CPU: L2 cache: 4096K

[ 40.458947] CPU 1/2 -> Node 0

[ 40.458948] CPU: Physical Processor ID: 0

[ 40.458948] CPU: Processor Core ID: 2

[ 40.458953] CPU1: Thermal monitoring enabled (TM2)

[ 40.459335] Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz stepping 0b

[ 40.459388] checking TSC synchronization [CPU#0 -> CPU#1]: passed.

[ 40.479849] SMP alternatives: switching to SMP code

[ 40.480229] Booting processor 2/4 APIC 0x1

[ 40.490607] Initializing CPU#2

[ 40.574659] Calibrating delay using timer specific routine.. 5907.96 BogoMIPS (lpj=11815921)

[ 40.574664] CPU: L1 I cache: 32K, L1 D cache: 32K

[ 40.574665] CPU: L2 cache: 4096K

[ 40.574667] CPU 2/1 -> Node 0

[ 40.574668] CPU: Physical Processor ID: 0

[ 40.574668] CPU: Processor Core ID: 1

[ 40.574673] CPU2: Thermal monitoring enabled (TM2)

[ 40.575054] Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz stepping 0b

[ 40.575128] checking TSC synchronization [CPU#0 -> CPU#2]: passed.

[ 40.597085] SMP alternatives: switching to SMP code

[ 40.597667] Booting processor 3/4 APIC 0x3

[ 40.608004] Initializing CPU#3

[ 40.686389] Calibrating delay using timer specific routine.. 5306.72 BogoMIPS (lpj=10613454)

[ 40.686394] CPU: L1 I cache: 32K, L1 D cache: 32K

[ 40.686395] CPU: L2 cache: 4096K

[ 40.686396] CPU 3/3 -> Node 0

[ 40.686397] CPU: Physical Processor ID: 0

[ 40.686398] CPU: Processor Core ID: 3

[ 40.686402] CPU3: Thermal monitoring enabled (TM2)

[ 40.686785] Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz stepping 0b

[ 40.686799] checking TSC synchronization [CPU#0 -> CPU#3]: passed.

[ 40.707221] Brought up 4 CPUs

[ 40.707341] CPU0 attaching sched-domain:

[ 40.707342] domain 0: span 05

[ 40.707343] groups: 01 04

[ 40.707345] domain 1: span 0f

[ 40.707346] groups: 05 0a

[ 40.707348] domain 2: span 0f

[ 40.707349] groups: 0f

[ 40.707350] CPU1 attaching sched-domain:

[ 40.707351] domain 0: span 0a

[ 40.707352] groups: 02 08

[ 40.707353] domain 1: span 0f

[ 40.707354] groups: 0a 05

[ 40.707356] domain 2: span 0f

[ 40.707357] groups: 0f

[ 40.707358] CPU2 attaching sched-domain:

[ 40.707359] domain 0: span 05

[ 40.707360] groups: 04 01

[ 40.707361] domain 1: span 0f

[ 40.707362] groups: 05 0a

[ 40.707364] domain 2: span 0f

[ 40.707365] groups: 0f

[ 40.707366] CPU3 attaching sched-domain:

[ 40.707367] domain 0: span 0a

[ 40.707368] groups: 08 02

[ 40.707369] domain 1: span 0f

[ 40.707370] groups: 0a 05

[ 40.707372] domain 2: span 0f

[ 40.707373] groups: 0f

[ 40.707605] net_namespace: 120 bytes

[ 40.707916] Time: 4:06:29 Date: 04/27/08

[ 40.707975] NET: Registered protocol family 16

[ 40.708144] ACPI: bus type pci registered

[ 40.708233] PCI: Using configuration type 1

[ 40.709414] ACPI: EC: Look up EC in DSDT

[ 40.710846] ACPI: Interpreter enabled

[ 40.710899] ACPI: (supports S0 S1 S3 S4 S5)

[ 40.711103] ACPI: Using IOAPIC for interrupt routing

[ 40.713742] ACPI: PCI Root Bridge PCI0

[ 40.714526] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO

[ 40.714572] PCI quirk: region 0500-053f claimed by ICH6 GPIO

[ 40.715215] PCI: Transparent bridge - 0000:00:1e.0

[ 40.715287] ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]

[ 40.715566] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P32_._PRT]

[ 40.715749] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PEX0._PRT]

[ 40.715826] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PEX1._PRT]

[ 40.715902] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PEX2._PRT]

[ 40.715979] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PEX3._PRT]

[ 40.716053] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PEX4._PRT]

[ 40.719362] ACPI: PCI Interrupt Link LNKA

[ 40.719785] ACPI: PCI Interrupt Link LNKB

[ 40.720196] ACPI: PCI Interrupt Link LNKC

[ 40.720606] ACPI: PCI Interrupt Link LNKD

[ 40.721016] ACPI: PCI Interrupt Link LNKE

[ 40.721426] ACPI: PCI Interrupt Link LNKF

[ 40.721836] ACPI: PCI Interrupt Link LNKG

[ 40.722245] ACPI: PCI Interrupt Link LNKH

[ 40.722690] Linux Plug and Play Support v0.97 (c) Adam Belay

[ 40.722752] pnp: PnP ACPI init

[ 40.722797] ACPI: bus type pnp registered

[ 40.724350] pnp: PnP ACPI: found 11 devices

[ 40.724394] ACPI: ACPI bus type pnp unregistered

[ 40.724590] PCI: Using ACPI for IRQ routing

[ 40.724633] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report

[ 40.734372] NET: Registered protocol family 8

[ 40.734418] NET: Registered protocol family 20

[ 40.734500] PCI-GART: No AMD northbridge found.

[ 40.734546] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0

[ 40.734743] hpet0: 4 64-bit timers, 14318180 Hz

[ 40.735806] AppArmor: AppArmor Filesystem Enabled

[ 40.738332] Time: tsc clocksource has been installed.

[ 40.738383] Switched to high resolution mode on CPU 0

[ 40.739373] Switched to high resolution mode on CPU 3

[ 40.739733] Switched to high resolution mode on CPU 1

[ 40.740767] Switched to high resolution mode on CPU 2

[ 40.746328] system 00:01: iomem range 0xf0000000-0xf7ffffff could not be reserved

[ 40.746385] system 00:01: iomem range 0xfeb00000-0xfeb03fff has been reserved

[ 40.746434] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved

[ 40.746484] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved

[ 40.746530] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved

[ 40.746575] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved

[ 40.746622] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved

[ 40.746667] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved

[ 40.746713] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved

[ 40.746758] system 00:01: iomem range 0xc0000-0xdffff has been reserved

[ 40.746812] system 00:01: iomem range 0xe0000-0xfffff could not be reserved

[ 40.746857] system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved

[ 40.746914] system 00:06: ioport range 0x500-0x53f has been reserved

[ 40.746959] system 00:06: ioport range 0x400-0x47f has been reserved

[ 40.747003] system 00:06: ioport range 0x680-0x6ff has been reserved

[ 40.747307] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0

[ 40.747360] PCI: Bridge: 0000:00:01.0

[ 40.747402] IO window: 2000-2fff

[ 40.747445] MEM window: e0000000-e2ffffff

[ 40.747488] PREFETCH window: d0000000-dfffffff

[ 40.747532] PCI: Bridge: 0000:00:1c.0

[ 40.747574] IO window: disabled.

[ 40.747618] MEM window: e3300000-e33fffff

[ 40.747662] PREFETCH window: disabled.

[ 40.747706] PCI: Bridge: 0000:00:1c.1

[ 40.747747] IO window: disabled.

[ 40.747801] MEM window: e3400000-e34fffff

[ 40.747845] PREFETCH window: disabled.

[ 40.747889] PCI: Bridge: 0000:00:1c.2

[ 40.747931] IO window: 1000-1fff

[ 40.747975] MEM window: e3100000-e31fffff

[ 40.748019] PREFETCH window: disabled.

[ 40.748063] PCI: Bridge: 0000:00:1c.3

[ 40.748105] IO window: disabled.

[ 40.748149] MEM window: e3500000-e35fffff

[ 40.748192] PREFETCH window: disabled.

[ 40.748237] PCI: Bridge: 0000:00:1c.4

[ 40.748278] IO window: disabled.

[ 40.748322] MEM window: e3600000-e36fffff

[ 40.748366] PREFETCH window: disabled.

[ 40.748410] PCI: Bridge: 0000:00:1e.0

[ 40.748452] IO window: disabled.

[ 40.748495] MEM window: e3000000-e30fffff

[ 40.748539] PREFETCH window: disabled.

[ 40.748591] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16

[ 40.748676] PCI: Setting latency timer of device 0000:00:01.0 to 64

[ 40.748688] PCI: Enabling device 0000:00:1c.0 (0000 -> 0002)

[ 40.748734] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17

[ 40.748820] PCI: Setting latency timer of device 0000:00:1c.0 to 64

[ 40.748832] PCI: Enabling device 0000:00:1c.1 (0000 -> 0002)

[ 40.748877] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 20 (level, low) -> IRQ 20

[ 40.748963] PCI: Setting latency timer of device 0000:00:1c.1 to 64

[ 40.748976] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18

[ 40.749061] PCI: Setting latency timer of device 0000:00:1c.2 to 64

[ 40.749073] PCI: Enabling device 0000:00:1c.3 (0000 -> 0002)

[ 40.749118] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19

[ 40.749205] PCI: Setting latency timer of device 0000:00:1c.3 to 64

[ 40.749217] PCI: Enabling device 0000:00:1c.4 (0000 -> 0002)

[ 40.749261] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17

[ 40.749347] PCI: Setting latency timer of device 0000:00:1c.4 to 64

[ 40.749355] PCI: Setting latency timer of device 0000:00:1e.0 to 64

[ 40.749361] NET: Registered protocol family 2

[ 40.782351] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)

[ 40.783219] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)

[ 40.786422] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[ 40.786943] TCP: Hash tables configured (established 524288 bind 65536)

[ 40.786988] TCP reno registered

[ 40.798326] checking if image is initramfs... it is

[ 41.333651] Freeing initrd memory: 7939k freed

[ 41.337413] audit: initializing netlink socket (disabled)

[ 41.337480] audit(1209269189.396:1): initialized

[ 41.340067] VFS: Disk quotas dquot_6.5.1

[ 41.340181] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[ 41.340327] io scheduler noop registered

[ 41.340378] io scheduler anticipatory registered

[ 41.340424] io scheduler deadline registered

[ 41.340581] io scheduler cfq registered (default)

[ 41.344190] Boot video device is 0000:01:00.0

[ 41.344357] PCI: Setting latency timer of device 0000:00:01.0 to 64

[ 41.344379] assign_interrupt_mode Found MSI capability

[ 41.344442] Allocate Port Service[0000:00:01.0:pcie00]

[ 41.344526] PCI: Setting latency timer of device 0000:00:1c.0 to 64

[ 41.344562] assign_interrupt_mode Found MSI capability

[ 41.344637] Allocate Port Service[0000:00:1c.0:pcie00]

[ 41.344676] Allocate Port Service[0000:00:1c.0:pcie02]

[ 41.344755] PCI: Setting latency timer of device 0000:00:1c.1 to 64

[ 41.344792] assign_interrupt_mode Found MSI capability

[ 41.344870] Allocate Port Service[0000:00:1c.1:pcie00]

[ 41.344915] Allocate Port Service[0000:00:1c.1:pcie02]

[ 41.344989] PCI: Setting latency timer of device 0000:00:1c.2 to 64

[ 41.345019] assign_interrupt_mode Found MSI capability

[ 41.345085] Allocate Port Service[0000:00:1c.2:pcie00]

[ 41.345121] Allocate Port Service[0000:00:1c.2:pcie02]

[ 41.345198] PCI: Setting latency timer of device 0000:00:1c.3 to 64

[ 41.345227] assign_interrupt_mode Found MSI capability

[ 41.345294] Allocate Port Service[0000:00:1c.3:pcie00]

[ 41.345329] Allocate Port Service[0000:00:1c.3:pcie02]

[ 41.345408] PCI: Setting latency timer of device 0000:00:1c.4 to 64

[ 41.345444] assign_interrupt_mode Found MSI capability

[ 41.345519] Allocate Port Service[0000:00:1c.4:pcie00]

[ 41.345555] Allocate Port Service[0000:00:1c.4:pcie02]

[ 41.373714] Real Time Clock Driver v1.12ac

[ 41.373882] hpet_resources: 0xfed00000 is busy

[ 41.373897] Linux agpgart interface v0.102

[ 41.373943] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

[ 41.374115] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 41.374286] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A

[ 41.374772] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 41.375629] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize

[ 41.377238] input: Macintosh mouse button emulation as /devices/virtual/input/input0

[ 41.377440] PNP: No PS/2 controller found. Probing ports directly.

[ 41.380370] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 41.380416] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 41.393290] mice: PS/2 mouse device common for all mice

[ 41.393379] cpuidle: using governor ladder

[ 41.393437] cpuidle: using governor menu

[ 41.393589] NET: Registered protocol family 1

[ 41.393691] registered taskstats version 1

[ 41.393858] Magic number: 4:502:111

[ 41.393937] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)

[ 41.393994] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[ 41.394038] EDD information not available.

[ 41.394088] Freeing unused kernel memory: 316k freed

[ 42.798003] fuse init (API version 7.9)

[ 42.807928] Monitor-Mwait will be used to enter C-1 state

[ 42.807932] ACPI: Processor CPU0

[ 42.808029] ACPI: Processor CPU1

[ 42.808170] ACPI: Processor CPU2

[ 42.808294] ACPI: Processor CPU3

[ 42.931200] usbcore: registered new interface driver usbfs

[ 42.931216] usbcore: registered new interface driver hub

[ 42.931626] usbcore: registered new device driver usb

[ 42.932633] USB Universal Host Controller Interface driver v3.0

[ 42.932681] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 18 (level, low) -> IRQ 18

[ 42.932692] PCI: Setting latency timer of device 0000:00:1a.0 to 64

[ 42.932694] uhci_hcd 0000:00:1a.0: UHCI Host Controller

[ 42.932880] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1

[ 42.932904] uhci_hcd 0000:00:1a.0: irq 18, io base 0x000030c0

[ 42.932992] usb usb1: configuration #1 chosen from 1 choice

[ 42.933007] hub 1-0:1.0: USB hub found

[ 42.933011] hub 1-0:1.0: 2 ports detected

[ 42.969436] SCSI subsystem initialized

[ 42.992795] libata version 3.00 loaded.

[ 43.036780] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21

[ 43.036791] PCI: Setting latency timer of device 0000:00:1a.1 to 64

[ 43.036793] uhci_hcd 0000:00:1a.1: UHCI Host Controller

[ 43.036811] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2

[ 43.036834] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030a0

[ 43.036910] usb usb2: configuration #1 chosen from 1 choice

[ 43.036924] hub 2-0:1.0: USB hub found

[ 43.036929] hub 2-0:1.0: 2 ports detected

[ 43.141947] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 17 (level, low) -> IRQ 17

[ 43.141955] PCI: Setting latency timer of device 0000:00:1a.2 to 64

[ 43.141958] uhci_hcd 0000:00:1a.2: UHCI Host Controller

[ 43.141980] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3

[ 43.142002] uhci_hcd 0000:00:1a.2: irq 17, io base 0x00003080

[ 43.142072] usb usb3: configuration #1 chosen from 1 choice

[ 43.142087] hub 3-0:1.0: USB hub found

[ 43.142091] hub 3-0:1.0: 2 ports detected

[ 43.245702] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23

[ 43.245710] PCI: Setting latency timer of device 0000:00:1d.0 to 64

[ 43.245712] uhci_hcd 0000:00:1d.0: UHCI Host Controller

[ 43.245726] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4

[ 43.245747] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003060

[ 43.245813] usb usb4: configuration #1 chosen from 1 choice

[ 43.245827] hub 4-0:1.0: USB hub found

[ 43.245831] hub 4-0:1.0: 2 ports detected

[ 43.347935] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19

[ 43.347940] PCI: Setting latency timer of device 0000:00:1d.1 to 64

[ 43.347942] uhci_hcd 0000:00:1d.1: UHCI Host Controller

[ 43.347956] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5

[ 43.347977] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003040

[ 43.348039] usb usb5: configuration #1 chosen from 1 choice

[ 43.348053] hub 5-0:1.0: USB hub found

[ 43.348057] hub 5-0:1.0: 2 ports detected

[ 43.379800] usb 2-2: new full speed USB device using uhci_hcd and address 2

[ 43.453172] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18

[ 43.453178] PCI: Setting latency timer of device 0000:00:1d.2 to 64

[ 43.453180] uhci_hcd 0000:00:1d.2: UHCI Host Controller

[ 43.453195] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6

[ 43.453214] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003020

[ 43.453277] usb usb6: configuration #1 chosen from 1 choice

[ 43.453291] hub 6-0:1.0: USB hub found

[ 43.453295] hub 6-0:1.0: 2 ports detected

[ 43.529749] usb 2-2: configuration #1 chosen from 1 choice

[ 43.556998] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 17 (level, low) -> IRQ 17

[ 43.557910] PCI: Setting latency timer of device 0000:00:1a.7 to 64

[ 43.557916] ehci_hcd 0000:00:1a.7: EHCI Host Controller

[ 43.557962] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7

[ 43.561871] ehci_hcd 0000:00:1a.7: debug port 1

[ 43.561875] PCI: cache line size of 32 is not supported by device 0000:00:1a.7

[ 43.561880] ehci_hcd 0000:00:1a.7: irq 17, io mem 0xe3225400

[ 43.576304] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[ 43.576393] usb usb7: configuration #1 chosen from 1 choice

[ 43.576411] hub 7-0:1.0: USB hub found

[ 43.576416] hub 7-0:1.0: 6 ports detected

[ 43.679118] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23

[ 43.679951] PCI: Setting latency timer of device 0000:00:1d.7 to 64

[ 43.679956] ehci_hcd 0000:00:1d.7: EHCI Host Controller

[ 43.680003] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8

[ 43.683892] ehci_hcd 0000:00:1d.7: debug port 1

[ 43.683896] PCI: cache line size of 32 is not supported by device 0000:00:1d.7

[ 43.683901] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe3225000

[ 43.771346] usb 5-2: new low speed USB device using uhci_hcd and address 2

[ 43.782959] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[ 43.783046] usb usb8: configuration #1 chosen from 1 choice

[ 43.783062] hub 8-0:1.0: USB hub found

[ 43.783066] hub 8-0:1.0: 6 ports detected

[ 43.886774] ACPI: PCI Interrupt 0000:07:03.0[A] -> GSI 19 (level, low) -> IRQ 19

[ 43.938759] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[e3000000-e30007ff] Max Packet=[2048] IR/IT contexts=[8/8]

[ 43.945845] ata_piix 0000:00:1f.2: version 2.12

[ 43.945852] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]

[ 43.945879] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 21 (level, low) -> IRQ 21

[ 43.945904] PCI: Setting latency timer of device 0000:00:1f.2 to 64

[ 43.945976] scsi0 : ata_piix

[ 43.946006] scsi1 : ata_piix

[ 43.946070] ata1: SATA max UDMA/133 cmd 0x3458 ctl 0x346c bmdma 0x3430 irq 21

[ 43.946072] ata2: SATA max UDMA/133 cmd 0x3450 ctl 0x3468 bmdma 0x3438 irq 21

[ 44.094079] usb 2-2: USB disconnect, address 2

[ 44.282075] ata1.00: ATA-7: HDS724040KLSA80, KFAOA46A, max UDMA/133

[ 44.282079] ata1.00: 781422768 sectors, multi 16: LBA48

[ 44.282096] ata1.01: ATAPI: Optiarc DVD RW AD-7170S, 1.01, max UDMA/66

[ 44.302533] ata1.00: configured for UDMA/133

[ 44.466117] usb 7-3: new high speed USB device using ehci_hcd and address 2

[ 44.474772] ata1.01: configured for UDMA/66

[ 44.597766] usb 7-3: configuration #1 chosen from 1 choice

[ 44.678482] ata2.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133

[ 44.678486] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)

[ 44.744961] ata2.00: configured for UDMA/133

[ 44.745060] scsi 0:0:0:0: Direct-Access ATA HDS724040KLSA80 KFAO PQ: 0 ANSI: 5

[ 44.746057] scsi 0:0:1:0: CD-ROM Optiarc DVD RW AD-7170S 1.01 PQ: 0 ANSI: 5

[ 44.746178] scsi 1:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5

[ 44.746234] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]

[ 44.746252] ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 21 (level, low) -> IRQ 21

[ 44.746270] PCI: Setting latency timer of device 0000:00:1f.5 to 64

[ 44.746292] scsi2 : ata_piix

[ 44.746318] scsi3 : ata_piix

[ 44.746359] ata3: SATA max UDMA/133 cmd 0x3448 ctl 0x3464 bmdma 0x3410 irq 21

[ 44.746361] ata4: SATA max UDMA/133 cmd 0x3440 ctl 0x3460 bmdma 0x3418 irq 21

[ 44.836274] usbcore: registered new interface driver libusual

[ 44.838619] Initializing USB Mass Storage driver...

[ 44.908377] ata3.00: ATA-7: HDT722525DLA380, V44OA96A, max UDMA/133

[ 44.908380] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)

[ 44.924334] ata3.00: configured for UDMA/133

[ 45.211344] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270001f65b28]

[ 45.259192] usb 8-6: new high speed USB device using ehci_hcd and address 3

[ 45.260352] ata4.00: ATAPI: Optiarc DVD RW AD-7190S, 1.01, max UDMA/100

[ 45.392294] usb 8-6: configuration #1 chosen from 1 choice

[ 45.392604] hub 8-6:1.0: USB hub found

[ 45.392954] hub 8-6:1.0: 4 ports detected

[ 45.446884] ata4.00: configured for UDMA/100

[ 45.446941] scsi 2:0:0:0: Direct-Access ATA HDT722525DLA380 V44O PQ: 0 ANSI: 5

[ 45.448289] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7190S 1.01 PQ: 0 ANSI: 5

[ 45.450147] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18

[ 45.450169] PCI: Setting latency timer of device 0000:04:00.0 to 64

[ 45.450248] scsi4 : pata_marvell

[ 45.450275] scsi5 : pata_marvell

[ 45.450290] ata5: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 18

[ 45.450291] ata6: DUMMY

[ 45.450996] BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00

[ 45.494704] scsi6 : SCSI emulation for USB Mass Storage devices

[ 45.494772] usbcore: registered new interface driver usb-storage

[ 45.494774] USB Mass Storage support registered.

[ 45.494862] usb-storage: device found at 2

[ 45.494863] usb-storage: waiting for device to settle before scanning

[ 45.623059] Driver 'sd' needs updating - please use bus_type methods

[ 45.623114] sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)

[ 45.623123] sd 0:0:0:0: [sda] Write Protect is off

[ 45.623124] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 45.623134] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 45.623176] sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)

[ 45.623182] sd 0:0:0:0: [sda] Write Protect is off

[ 45.623184] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 45.623193] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 45.623196] sda:<4>Driver 'sr' needs updating - please use bus_type methods

[ 45.634298] sda1

[ 45.634353] sd 0:0:0:0: [sda] Attached SCSI disk

[ 45.634475] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)

[ 45.634482] sd 1:0:0:0: [sdb] Write Protect is off

[ 45.634484] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00

[ 45.634494] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 45.634521] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)

[ 45.634527] sd 1:0:0:0: [sdb] Write Protect is off

[ 45.634529] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00

[ 45.634539] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 45.634541] sdb:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray

[ 45.639748] Uniform CD-ROM driver Revision: 3.20

[ 45.639786] sr 0:0:1:0: Attached scsi CD-ROM sr0

[ 45.648687] sdb1

[ 45.648735] sd 1:0:0:0: [sdb] Attached SCSI disk

[ 45.648784] sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)

[ 45.648794] sd 2:0:0:0: [sdc] Write Protect is off

[ 45.648797] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00

[ 45.648814] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 45.648854] sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)

[ 45.648860] sd 2:0:0:0: [sdc] Write Protect is off

[ 45.648861] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00

[ 45.648871] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 45.648873] sdc: sdc1 sdc2 sdc3 sdc4

[ 45.678908] sd 2:0:0:0: [sdc] Attached SCSI disk

[ 45.682171] sd 0:0:0:0: Attached scsi generic sg0 type 0

[ 45.682184] sr 0:0:1:0: Attached scsi generic sg1 type 5

[ 45.682196] sd 1:0:0:0: Attached scsi generic sg2 type 0

[ 45.682208] sd 2:0:0:0: Attached scsi generic sg3 type 0

[ 45.682220] sr 3:0:0:0: Attached scsi generic sg4 type 5

[ 45.688364] sr1: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray

[ 45.688397] sr 3:0:0:0: Attached scsi CD-ROM sr1

[ 45.734987] usb 2-2: new full speed USB device using uhci_hcd and address 3

[ 45.811294] Attempting manual resume

[ 45.811297] swsusp: Resume From Partition 8:35

[ 45.811298] PM: Checking swsusp image.

[ 45.811452] PM: Resume from disk failed.

[ 45.843294] kjournald starting. Commit interval 5 seconds

[ 45.843309] EXT3-fs: mounted filesystem with ordered data mode.

[ 45.892045] usb 2-2: configuration #1 chosen from 1 choice

[ 46.137484] usb 5-2: new low speed USB device using uhci_hcd and address 3

[ 46.314929] usb 5-2: configuration #1 chosen from 1 choice

[ 46.520351] usb 8-6.4: new high speed USB device using ehci_hcd and address 4

[ 46.617337] usb 8-6.4: configuration #1 chosen from 1 choice

[ 46.617943] scsi7 : SCSI emulation for USB Mass Storage devices

[ 46.618048] usb-storage: device found at 4

[ 46.618049] usb-storage: waiting for device to settle before scanning

[ 50.499034] usb-storage: device scan complete

[ 50.499447] scsi 6:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 6.51 PQ: 0 ANSI: 0 CCS

[ 50.499945] scsi 6:0:0:1: CD-ROM SanDisk U3 Cruzer Micro 6.51 PQ: 0 ANSI: 0

[ 50.501174] sd 6:0:0:0: [sdd] 2014271 512-byte hardware sectors (1031 MB)

[ 50.501798] sd 6:0:0:0: [sdd] Write Protect is off

[ 50.501800] sd 6:0:0:0: [sdd] Mode Sense: 45 00 00 08

[ 50.501801] sd 6:0:0:0: [sdd] Assuming drive cache: write through

[ 50.503920] sd 6:0:0:0: [sdd] 2014271 512-byte hardware sectors (1031 MB)

[ 50.504543] sd 6:0:0:0: [sdd] Write Protect is off

[ 50.504545] sd 6:0:0:0: [sdd] Mode Sense: 45 00 00 08

[ 50.504547] sd 6:0:0:0: [sdd] Assuming drive cache: write through

[ 50.504549] sdd: sdd1

[ 50.505702] sd 6:0:0:0: [sdd] Attached SCSI removable disk

[ 50.505740] sd 6:0:0:0: Attached scsi generic sg5 type 0

[ 50.512899] sr2: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray

[ 50.512945] sr 6:0:0:1: Attached scsi CD-ROM sr2

[ 50.512982] sr 6:0:0:1: Attached scsi generic sg6 type 5

[ 50.553914] input: Power Button (FF) as /devices/virtual/input/input1

[ 50.572565] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 50.583496] ACPI: Power Button (FF) [PWRF]

[ 50.583539] input: Sleep Button (CM) as /devices/virtual/input/input2

[ 50.583649] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 50.606801] e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0

[ 50.606804] e1000e: Copyright (c) 1999-2007 Intel Corporation.

[ 50.606850] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20

[ 50.606861] PCI: Setting latency timer of device 0000:00:19.0 to 64

[ 50.609761] heci: Intel(R) AMT Management Interface - version 3.1.0.31

[ 50.609764] heci: Copyright (c) 2003 - 2007 Intel Corporation.

[ 50.617933] ACPI: Sleep Button (CM) [SLPB]

[ 50.733005] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:1f:05:01

[ 50.733009] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection

[ 50.733033] 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff

[ 50.733071] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16

[ 50.733075] PCI: Setting latency timer of device 0000:00:03.0 to 64

[ 50.734070] heci: link layer has been established.

[ 50.838662] heci: heci driver initialization successful.

[ 50.898432] Bluetooth: Core ver 2.11

[ 50.901075] NET: Registered protocol family 31

[ 50.901077] Bluetooth: HCI device and connection manager initialized

[ 50.901080] Bluetooth: HCI socket layer initialized

[ 50.902034] usbcore: registered new interface driver hiddev

[ 50.915917] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb5/5-2/5-2:1.0/input/input3

[ 50.925634] input: PC Speaker as /devices/platform/pcspkr/input/input4

[ 50.933658] input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2

[ 50.946433] Bluetooth: HCI USB driver ver 2.9

[ 50.961626] Fixing up Logitech keyboard report descriptor

[ 50.962089] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb5/5-2/5-2:1.1/input/input5

[ 50.980604] iTCO_vendor_support: vendor-support=0

[ 50.981372] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)

[ 51.005490] nvidia: module license 'NVIDIA' taints kernel.

[ 51.258057] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460)

[ 51.258069] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16

[ 51.258078] PCI: Setting latency timer of device 0000:01:00.0 to 64

[ 51.258095] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[ 51.258180] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008

[ 51.261420] input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2

[ 51.261436] usbcore: registered new interface driver usbhid

[ 51.261439] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver

[ 51.261557] usbcore: registered new interface driver hci_usb

[ 51.366214] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22

[ 51.367249] PCI: Setting latency timer of device 0000:00:1b.0 to 64

[ 51.603981] usb-storage: device scan complete

[ 51.604729] scsi 7:0:0:0: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0

[ 51.605468] scsi 7:0:0:1: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0

[ 51.606214] scsi 7:0:0:2: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0

[ 51.606962] scsi 7:0:0:3: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0

[ 51.608357] sd 7:0:0:0: [sde] Attached SCSI removable disk

[ 51.608385] sd 7:0:0:0: Attached scsi generic sg7 type 0

[ 51.609475] sd 7:0:0:1: [sdf] Attached SCSI removable disk

[ 51.609499] sd 7:0:0:1: Attached scsi generic sg8 type 0

[ 51.610598] sd 7:0:0:2: [sdg] Attached SCSI removable disk

[ 51.610621] sd 7:0:0:2: Attached scsi generic sg9 type 0

[ 51.611725] sd 7:0:0:3: [sdh] Attached SCSI removable disk

[ 51.611750] sd 7:0:0:3: Attached scsi generic sg10 type 0

[ 52.108528] lp: driver loaded but no devices found

[ 52.173412] Adding 4000176k swap on /dev/sdc3. Priority:-1 extents:1 across:4000176k

[ 52.702693] EXT3 FS on sdc1, internal journal

[ 52.812579] device-mapper: uevent: version 1.0.3

[ 52.812598] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com

[ 54.541213] kjournald starting. Commit interval 5 seconds

[ 54.541396] EXT3 FS on sdc4, internal journal

[ 54.541400] EXT3-fs: mounted filesystem with ordered data mode.

[ 54.557579] kjournald starting. Commit interval 5 seconds

[ 54.564360] EXT3 FS on sda1, internal journal

[ 54.564362] EXT3-fs: mounted filesystem with ordered data mode.

[ 54.590509] kjournald starting. Commit interval 5 seconds

[ 54.596267] EXT3 FS on sdb1, internal journal

[ 54.596271] EXT3-fs: mounted filesystem with ordered data mode.

[ 54.610653] kjournald starting. Commit interval 5 seconds

[ 54.610825] EXT3 FS on sdc2, internal journal

[ 54.610828] EXT3-fs: mounted filesystem with ordered data mode.

[ 55.105500] ip_tables: (C) 2000-2006 Netfilter Core Team

[ 56.785807] No dock devices found.

[ 57.793293] NET: Registered protocol family 10

[ 57.793440] lo: Disabled Privacy Extensions

[ 58.060175] ppdev: user-space parallel port driver

[ 58.129631] audit(1209269207.116:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=6042 profile="/usr/sbin/cupsd" namespace="default"

[ 58.889813] RPC: Registered udp transport module.

[ 58.889816] RPC: Registered tcp transport module.

[ 58.923252] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).

[ 58.956906] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory

[ 58.983410] NFSD: starting 90-second grace period

[ 60.093388] ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 60.093457] Bluetooth: L2CAP ver 2.9

[ 60.093461] Bluetooth: L2CAP socket layer initialized

[ 60.141653] Bluetooth: RFCOMM socket layer initialized

[ 60.141670] Bluetooth: RFCOMM TTY layer initialized

[ 60.141671] Bluetooth: RFCOMM ver 1.8

[ 66.375421] 0000:00:19.0: eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX

[ 66.381152] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[ 68.957543] NET: Registered protocol family 17

[ 83.684158] eth0: no IPv6 routers present

If anything stands out, I'd still be interested in knowing what might cause the kernel panic.